Your browser does not support JavaScript! How to Be A Water Conservation Juggernaut At Home
ARTICLES | Environment | How to Be A Water Conservation Juggernaut At Home

How to Be A Water Conservation Juggernaut At Home

Matt Bradbury | March 24, 2015

The summertime can be a difficult time for municipal water levels, conserving water is of utmost importance when the warm weather comes rolling in. As you’ll see in the following post, putting a plug in at-home water waste is a lot easier than expected!
  • Fix any leaky faucets and pipes – a tiny drip from a faucet can waste up to 20 gallons of water per day! Save money and water by installing low-flow faucet aerators.
  • Use your toilet for its intended purpose, not as a garbage bucket – toilets can waste up to 7 gallons of water per flush, that’s quite a bit of water to get rid of a tissue you blew your nose with.
  • it’s yellow, let it mellow… while this may not be an appealing way to save water take into consideration how much water is wasted per flush!
  • Check see if your toilet is wasting water – put some food coloring in the tank and wait for a bit, if the water in the bowl starts showing the food coloring you used, you need to fix it!
  • Take shorter showers and install water-saving shower heads – while there’s nothing more enjoyable than a long hot shower, it accounts for nearly 1.2 trillion gallons of water used in the US annually! Installing low-flow showerheads can save you up to 2.5 gallons a minute. Another way to save water in the shower – use a bucket to catch the water from the tap while waiting for the water to warm up – it can be used for watering plants, flushing the toilet or rinsing off veggies or dishes.
  • Install High-Efficiency Toilets (HETs) in your house – look for toilets that have the WaterSense logo on them since they consume as little as 1.6 gallons per flush. A marked improvement from older toilets which can waste 3.5, 5 or even 7 gallons of water per flush!
  • Convert your old toilet into a low flush toilet – this is an excellent way to cut down on water waste every time you flush, especially if you have an older toilet.
  • Don’t leave the water running when brushing your teeth – all you need is a little water to wet your brush, so why keep the faucet running?
  • Shaving? Turn off the tap – fill up the sink with a bit of water or only convert the faucet on when you need to rinse off the razor during a shave.
  • Only use dishwashers and washing machines when fully loaded – a full load means more bang for your buck and more water savings. Newer washing machines have been designed to use less water per load, and many new dishwashers don’t require dishes to be pre-rinsed, keeping water waste to a minimum.
  • If washing dishes by hand, don’t run the tap to rinse – if you happen to have a double sink, fill up one for washing and the other for rinsing, if you only have one sink fill up a small tub or bucket for rinsing.
  • Rinsing fruits or veggies? Don’t leave the faucet running – see a pattern here? The average faucet runs 2.5 gallons of water per minute so turn it off to keep water waste down to a minimum.
  • Dirty car? Use a car wash, not the garden hose – if you have the urge to give Ol’ Betsy a good cleaning, take it to a car wash since they are designed for washing cars efficiently, not your garden hose.
  • Use less energy – conserving water goes beyond the four walls of your house. Power plants use thousands of gallons of water to keep cool, so less power consumption means less water waste.
You might also be interested in:
Ontario's Blue Box Program
Sesame Seed or Microplastic?
National Wildlife Federation: Project RISE Charity Update

Did you find this Page helpful?